In-situ monitoring of cell-secreted lactate by electrochemiluminescence sensing under biomimetic microfluidic confinement

Cell migration proceeds in 3D matrices in vivo, which can naturally switch to distinct phenotypes for better invasion in confined microenvironments. The studies of important metabolites under confinement are extremely meaningful for comprehensive insights into cancer metastasis. The integration of cell confinement device and analytical techniques is a key point for in-situ analysis of significant metabolites in vitro.Herein, an electrochemiluminescence(ECL) sensing platform was designed for in-s...     

碳纳米管膜的高温纯化研究

为了获得纯度更高的碳纳米管膜, 保证材料发热稳定性, 需要对通过化学气相沉积法得到的碳纳米管膜进行二次纯化. 通过使用高温纯化炉, 在真空状态下, 从1700℃到3200℃分7挡温度对碳纳米管进行纯化, 并对其含碳量和方块电阻进行比较. 结果表明, 高温纯化后的碳纳米管膜含碳量从95.0%提高到99.9%, 解决了含碳量低的问题. 同时, 在高温纯化中发现碳纳米管膜方块电阻从纯化前3Ω降低到0.5Ω, 方块电阻的降低对碳纳米管膜具有十分重要的意义, 同样对碳纳米管膜后续产品的开发也有重要作用.     

Pharmacokinetic study of tanshinol and ligustrazine in rat plasma after intravenous administration of tanshinol and Danshen Chuanxiongqin Injection

To investigate the effect of ligustrazine on the pharmacokinetic profile of tanshinol after intravenous administration in rats, a sensitive liquid chromatography tandem mass spectrometry method was developed and validated for quantitative determination of tanshinol and ligustrazine in rat plasma. After prepared by protein precipitation, the analytes were separated on a Waters Acquity HSS T3 column (100 × 2.1 mm, 1.8μm) and eluted by 0.1% formic acid in water and acetonitrile at a flow rate of 0.4 ml/min. The precursor–product ion transitions were m/z 197.0 → 135.0 for tanshinol, m/z 417.1 → 255.1 for liquiritin (internal standard) in negative ion mode and m/z 137.1 → 55.0 for ligustrazine in positive ion mode. To avoid the interference of tanshinol metabolite transformation, the stability of analytes in samples collected after administration was assessed. The validated method was successfully applied to a pharmacokinetic study after intravenous administration of single tanshinol and Danshen Chuanxiongqin Injection. After Danshen Chuanxiongqin injection administration, the values of elimination half-time, area under the concentration–time curve and C_o were 0.36 ± 0.13 h, 1.29 ± 0.37 μg/ml h and 10.51 ± 2.58 μg/ml for male rats, respectively. In the single tanshinol group, the corresponding values were 0.56 ± 0.24 h, 1.85 ± 0.44 μg/ml h and 14.11 ± 2.26 μg/ml for male rats—30–40% higher than those for the Danshen Chuanxiongqin Injection group. There was a significant different between male and female rats. This study provided information on the influence of ligustrazine on the pharmacokinetic characteristics of tanshinol after intravenous administration of Danshen Chuanxiongqin Injection in rats, which will be helpful for its clinical application.     

基于MCMC主成分回归分析方法的经济增长因素研究

将MCMC算法融合到主成分回归分析模型中,提出MCMC主成分回归分析方法.新方法既具有有效避免解释变量之间的多重共线性问题以及简化回归方程结构的主成分回归分析方法的优势,又能够充分利用MCMC算法的融合先验信息、模型信息及样本似然函数的长处.将方法应用于对嘉兴市1997年至201.0年的经济发展指标的数据建模分析,结果表明,方法能有效克服现有分析方法的不足,建立预测精度更高的模型.     

Wave turbulence and intermittency in directional wave fields

The evolution of surface gravity waves is driven by nonlinear interactions that trigger an energy cascade similarly to the one observed in hydrodynamic turbulence. This process, known as wave turbulence, has been found to display anomalous scaling with deviation from classical turbulent predictions due to the emergence of coherent and intermittent structures on the water surface. In the ocean, waves are spread over a wide range of directions, with a consequent attenuation of the nonlinear properties. A laboratory experiment in a large wave facility is presented to discuss the sensitivity of wave turbulence on the directional properties of model wave spectra. Results show that the occurrence of coherent and intermittent structures become less likely with the broadening of the wave directional spreading. There is no evidence, however, that intermittency completely vanishes.     

Characteristics of black carbon aerosol in Jiaxing,China during autumn 2013

We conducted measurements of black carbon（BC） aerosol in Jiaxing,China during autumn from September 26 to November 30,2013.We investigated temporal and diurnal variations of BC,and its correlations with meteorological parameters and other major pollutants.Results showed that hourly mass concentrations of BC ranged from 0.2 to 22.0 μg/m³,with an average of 5.1 μg/m³.The diurnai variation of BC exhibited a bimodal distribution,with peaks at 07:00 and 18:00.The morning peak was larger than the evening peak.The mass percentages of BC in PM_2.5 and PM₁₀ were 7.1%and 4.8%,respectively.The absorption coefficient of BC was calculated to be 44.4 Mm^-1,which accounted for 11.1%of the total aerosol extinction.BC was mainly emitted from local sources in southwestern Jiaxing where BC concentrations were generally greater than 11 μg/m³ during the measurement period.Correlation analysis indicated that the main sources of BC were motor vehicle exhaust,and domestic and industrial combustion.     

Malononitrile-involved Michael addition polymerization: An efficient and facile route for cyano-rich polyesters with programmable thermal and mechanical properties

An efficient, atom-economic, oxygen-tolerant, and water-tolerant strategy has been established to synthesize cyano-rich polyesters. Four kinds of organic bases, 1,1,3,3-tetramethylguanidine (TMG), 4-dimethylaminopyridine, triethylamine, and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) were explored for accelerating Michael addition polymerization of malononitrile and 1,4-butandiol diacrylate. TMG can promote the polymerization efficiently under mild conditions to quantitatively afford polyester with high-molecular weight and moderate polydispersity. The comparison of the kinetic studies of TMG and TBD reveals that TMG shows better catalytic performance, while the catalysis of TBD brings about oligomers in spite of the higher efficiency at early age of the polymerization. Moreover, other diacrylate compounds could also be quantitatively polymerized to afford polyesters with high molecular weight. When dimethacrylate is chose as the monomer, the polymerization becomes sluggish. All the afforded polyesters display programmable thermal and mechanical properties that are closely related to their chemical structures.     

Light Hydrocarbon Separations Using Porous Organic Framework Materials

Light hydrocarbons (C₁–C₃) are used as basic energy feedstocks and as commodity organic compounds for the production of many industrially necessary chemicals. Due to the nature of the raw materials and production processes, light hydrocarbons are generated as mixtures, but the high-purity single-component products are of vital importance to the petrochemical industry. Consequently, the separation of these C₁–C₃ products is a crucial industrial procedure that comprises a significant share of the total global energy consumption per year. As a complement to traditional separation methods (distillation, partial hydrogenation, etc.), adsorptive separations using porous solids have received widespread attention due to their lower energy costs and higher efficiency. Extensive research has been devoted to the use of porous materials such as zeolites and metal-organic frameworks (MOFs) as solid adsorbents for these key separations, owing to the high porosity, tunable pore structures, and unsaturated metal sites present in these materials. Recently, porous organic framework (POF) materials composed of organic building blocks linked by covalent bonds have also shown excellent properties in light hydrocarbon adsorption and separation, sparking interest in the use of these materials as adsorbents in separation processes. This Minireview summarizes the recent advances in the use of POFs for light hydrocarbon separations, including the separation of mixtures of methane/ethane, methane/propane, ethylene/ethane, acetylene/ethylene, and propylene/propane, while highlighting the relationships between the structural features of these materials and their separation performances. Finally, the difficulties, challenges, and opportunities associated with leveraging POFs for light hydrocarbon separations are discussed to conclude the review.     

倾斜层中的对流斑图及其临界条件

通过二维流体力学基本方程的数值模拟，探讨了Prandtl(普朗特)数Pr=6.99时，倾斜矩形腔体中的对流斑图和斑图转换的临界条件.根据倾角θ和相对Rayleigh(瑞利)数Ra_r的变化，倾斜矩形腔体中的对流斑图可以分为:单滚动圈对流斑图、充满腔体的多滚动圈对流斑图和过渡阶段的多滚动圈对流斑图.当θ一定时，随着Ra_r的减小，系统由充满腔体的多滚动圈对流斑图过渡到单滚动圈对流斑图.这时，对流振幅A和Nusselt(努塞尔)数Nu随着Ra_r的增加而增加.当Ra_r=9时，随着θ的增加，系统由充满腔体的多滚动圈对流斑图过渡到单滚动圈对流斑图，这时对流振幅A随着θ的增加而减小，Nusselt数Nu随着θ的增加而增加.在θ_c-Ra_r平面上对多滚动圈到单滚动圈对流斑图过渡的模拟结果表明， 在Ra_r=2时, 腔体中没有发现多滚动圈对流斑图.在Ra_r为2.5左右时，腔体中出现多滚动圈到单滚动圈对流斑图的过渡.当多滚动圈到单滚动圈对流斑图过渡的临界倾角θ_c<10°时，θ_{c随着Rar的减小而增加.当θc>10°时，θc随着Rar的增加而增加，在Rar≤5时，θc随着Rar的增加而迅速增加；当Rar>5时，θc随着Rar的增加而缓慢增加.θc与Rarθ的关系与Rar类似}     

Global Regularity of 3D Nonhomogeneous Incompressible Micropolar Fluids

This paper is concerned with the global well-posedness of strong and classical solutions for the 3D nonhomogeneous incompressible micropolar equations with vacuum. We prove that the problem (1.1)–(1.5) has a unique global strong/classical solution \((\rho,u,w)\), provided \(\mu_{1}\) is sufficiently large, or \(\|\rho_{0}\|_{L^{\infty}}\) or \(\|\rho_{0}^{1/2}u_{0}\| ^{2}_{L^{2}}+\|\rho_{0}^{1/2}w_{0}\|^{2}_{L^{2}}\) is small enough.